product range

Incubator ( bacteriological )


Incubators are available in three models.

   •  VS 131 ( Natural Convection )
   •  VS 132 ( Forced Air Draft )
   •  VS 133 ( Forced Air Circulation )

   These series represent modern laboratory Incubators.
   Precise and gentle temperature control with uniform
   temperature within the cell makes it best suited for
   laboratory incubation

Technical Specifications

Temperature Range :  5°C above ambient to 60°C
Temp. Accuracy : ± 0.5°C
Temp. Uniformity : ± 1°C
Heating Control : Auto tuned temperature microcontroller
 with PID algorithm.
Safety Thermostat : Stand by Thermostat cuts off heater if
  temperature over-shoots
Heating Element : Spiral type heating coils made of
  Kanthal wire.
Air Flow : VS131 - Natural convection
 VS132 - Motorised blower unit of 1/12 HP. fit
 at bottom side.
 VS133 - Motorised blower unit of 1/12 HP. fit
  at top side.
Glass Door : Full view glass door is provided.

Construction

Interior :  Made of mild steel with heat resistant
 aluminium paint or Stainless steel with
 mirror polish.
Exterior : Made of thick gauge mild steel sheet,
 finished with epoxy powder coating.
Insulation : Fibre glass wool.

Models Standard (s) or GMP (G)

 Models     Heater  
   Wattage  
Internal dim. H.W.D (cm) External dim. H.W.D (cm) Shelves No.s
...VS 131
VS 132
VS 133
......2
A115 W
125 W
115 W
35 x 35 x 3590 x 55 x 352
B250 W
275 W
250 W
45 x 45 x 45100 x 65 x 653
C500 W
550 W
500 W
60 x 45 x 45115 x 65 x 454
D750 W
800 W
750 W
60 x 60 x 60115 x 80 x 804
E1000 W
1100 W
1000 W
90 x 60 x 60173 x 110 x 925

 

bacteriological incubator manufacturer
resources

Tune your Thermostatic equipment when there is
a considerable change
in working load or set temperature.
It increases efficiency
and saves power.

more tips
DOWNLOAD Complete Product Catalog