+91 9825 632377 [email protected]
Model "VS122" series are Industrial cum Laboratory oven with Forced air convection heating. It incorporates a heating system with motorised blower unit at bottom side of oven. The blower blows fresh air through a heating platform and enables hot air draft in the working chamber creating uniform temperature through out the chamber.
The excess hot air with fumes and moisture flows out through an adjustable ventilation. Forced air draft system is ideal for wet and moist materials. Used for pre heating, drying, sterilizing, baking, aging etc.
|Temperature Range :||5°C above ambient to 250°C|
|Temp. Accuracy :||± 1°C|
|Temp Uniformity :||± 2°C|
|Heating control :|| Auto tuned temperature microcontroller|
with PID algorithm.
|Safety Thermostat :|| Stand by Thermostat cuts off heater if|
|Heating Element :|| Spiral type heater platform made of best |
quality kanthal wire.
|Air Flow :|| Forced air draft by means of a motorised|
|Motor :||1/12 HP,TEFC, F - Class insulation.|
|Interior :|| Made of mild steel with heat resistant |
aluminium paint or Stainless steel with
|Exterior :|| Made of thick gauge mild steel sheet,|
finished with epoxy powder coating.
|Insulation :||Fibre glass wool|
|Models||Wattage (KW)||Internal dim. H.W.D (cm)||External dim. H.W.D (cm)||Shelves No.s|
|VS 122 A||6.00||90 x 60 x 60||185 x 112 x 85||5|
Tune your Thermostatic equipment when there is
a considerable change
in working load or set temperature.
It increases efficiency
and saves power.