+91 9825 632377 firstname.lastname@example.org
"VS501" Series are humidity ovens with electronically controlled evaporative humidifier and temperature micro controller. With advanced RH sensors it gives precise humid conditions. Steam injection system is incorporated with stainless steel boiler and reservoir. It has a clear view glass inner door. Motorised blower recirculates air which ensures uniform temperature and humidity inside the chamber. Poly-Urethane is used for efficient insulation. Widely used to test performance of samples in humid atmosphere.
|Standard Mode :|| Interior SS 304 with mirror polish. |
Exterior MS With epoxy coating.
|GMP Model :|| Interior SS 316 with mirror polish.|
Exterior SS 304 with matt finish.
|Temperature Range :||5°C above ambient to 60°C|
|Temperature Accuracy :||± 0.5°C Exterior MS With epoxy coating.|
|Temperature Control :|| Auto tuned temperature microcontroller |
with PID algorithm.
|Humidity Range :||5% above ambient to 90%|
|Humidity Control :|| Advanced RH micro controller with|
PID algorithm and %RH display.
|Heating :||"U" shaped SS tubular air heater.|
|Air Flow :|| Forced air re-circulation by means of|
|Motor :||1/12 HP, TEFC, F - Class insulation.|
|Insulation :||PUF ( Poly Urethane Foam )|
|Safety Features :|| Stand by Thermostat cuts off heater if |
|Models No.s||Capacity Litres||Internal dim H.W.D (cm)||External dim H.W.D (cm)||Shelves No.s|
|VS 501 S/G||100||50 x 50 x 40||142 x 66 x 72||2|
|VS 502 S/G||170||70 x 60 x 40||162 x 76 x 72||3|
|VS 503 S/G||225||75 x 60 x 50||167 x 76 x 82||3|
|VS 504 S/G||325||90 x 60 x 60||182 x 76 x 87||4|
Tune your Thermostatic equipment when there is
a considerable change
in working load or set temperature.
It increases efficiency
and saves power.