+91 9825 632377 firstname.lastname@example.org
"VS112" series are high temperature lab oven with Forced air convection heating. Its heating system is equipped with motorised blower unit at bottom side and a heater platform made out of spiral type heating coils of nichrome wire. The blower blows fresh air through the heating platform and enables hot air draft in the working chamber creating uniform temperature through out the chamber. The excess hot air with fumes and moisture flows out through an adjustable ventilation. High temperature forced air draft system is ideal for wet and moist materials. Used for pre heating, drying, sterilizing, baking, aging, etc.
|Temperature Range :||5°C above ambient to 400°C|
|Temp. Accuracy :||± 1°C|
|Temp Uniformity :||± 2°C|
|Heating Control :|| 240V, 50 Hz|
Auto tuned temperature microcontroller
with PID algorithm.
|Heating Control :|| Auto tuned temperature microcontroller|
with PID algorithm
|Heating Element :|| Spiral type heating coils made of |
Kanthal / Nichrome wire.
|Air Flow :|| Forced air draft by means of motorised |
|Motor :||1/12 HP, TEFC, F - Class Insulation.|
|Interior :|| Made of mild steel with heat resistant |
aluminium paint or Stainless steel with
|Exterior :|| Made of thick gauge mild steel sheet,|
finished with epoxy powder coating.
|Insulation :||Fibre glass wool|
|Models||Wattage (KW)||Internal dim. H.W.D (cm)||External dim. H.W.D (cm)||Shelves No.s|
|VS 112 A||2.50||35 x 35 x 35||87 x 84 x 67||2|
|VS 112 B||3.00||45 x 45 x 45||97 x 94 x 77||3|
|VS 112 C||4.00||60 x 45 x 45||112 x 94 x 77||4|
|VS 112 D||5.00||60 x 60 x 60||112 x 109 x 92||4|
Tune your Thermostatic equipment when there is
a considerable change
in working load or set temperature.
It increases efficiency
and saves power.